Body : |
- SS 316. SS304 and SS316L are required based on big volume.
- Fully precision machined by CNC machine.
- Angle design make the biggest flowing liquid as well as for disk easy open and close.
- Connection: clamp end, weld end, male end and female end are available from 1/2″, 3/4″ up to 4″.
- Connection: weld end are available the tubing according to 3A, SMS, RJT(BS), DIN 11851.
- Middle clamp designed are available from 1/2″, 3/4″ up to 3″.
- Middle flange designed are available from 1/2″, 3/4″ up to 4″.
|
Type of ends available : |
- 3A: Clamp, Weld, Bevel male and female are available from 1/2″ up 4″
- SMS: Weld end, male and female end are available from DN25 up to DN104.
- DIN: Weld end, male and female end are available from DN28, DN34, DN52, DN70, DN85 and DN101.6, DN104.
- I-Line: available from 1″ up to 4″.
|
Spring : |
Stainless steel sanitary both closing design, both opening design is required. |
Seal ring of stem : |
EPDM. VITON OR SILICON is required. |
Body O-ring : |
NBR or EPDM. VITON is required. |
Working temperature : |
-10o ~ 120o (EPDM seal)
Techical Datas :
Body : |
- SS 316. SS304 and SS316L are required based on big volume.
- Fully precision machined by CNC machine.
- Angle design make the biggest flowing liquid as well as for disk easy open and close.
- Connection: clamp end, weld end, male end and female end are available from 1/2″, 3/4″ up to 4″.
- Connection: weld end are available the tubing according to 3A, SMS, RJT(BS), DIN 11851.
- Middle clamp designed are available from 1/2″, 3/4″ up to 3″.
- Middle flange designed are available from 1/2″, 3/4″ up to 4″.
|
Type of ends available : |
- 3A: Clamp, Weld, Bevel male and female are available from 1/2″ up 4″
- SMS: Weld end, male and female end are available from DN25 up to DN104.
- DIN: Weld end, male and female end are available from DN28, DN34, DN52, DN70, DN85 and DN101.6, DN104.
- I-Line: available from 1″ up to 4″.
|
Spring : |
Stainless steel sanitary both closing design, both opening design is required. |
Seal ring of stem : |
EPDM. VITON OR SILICON is required. |
Body O-ring : |
NBR or EPDM. VITON is required. |
Working temperature : |
-10o ~ 120o (EPDM seal) |
|